Interplay of electrokinetic effects in nonpolar solvents for electronic paper displays.

HYPOTHESIS: Electronic paper displays rely on electrokinetic effects in nonpolar solvents to drive the displacement of colloidal particles within a fluidic cell. While Electrophoresis (EP) is a well-established and frequently employed phenomenon, electro-osmosis (EO), which drives fluid flow along charged solid surfaces, has not been studied as extensively. We hypothesize that by exploiting the interplay between these effects, an enhanced particle transport can be achieved. EXPERIMENTS: In this study, we experimentally investigate the combined effects of EP and EO for colloidal particles in non-polar solvents, driven by an electric field. We use astigmatism micro-particle tracking velocimetry (A-µPTV) to measure the motion of charged particles within model fluidic cells. Using a simple approach that relies on basic fluid flow properties we extract the contributions due to EP and EO, finding that EO contributes significantly to particle transport. The validity of our approach is confirmed by measurements on particles with different magnitudes of charge, and by comparison to numerical simulations. FINDINGS: We find that EO flows can play a dominant role in the transport of particles in electrokinetic display devices. This can be exploited to speed up particle transport, potentially yielding displays with significantly faster switching times.

Single-Molecule Protein Analysis by Centrifugal Droplet Immuno-PCR with Magnetic Nanoparticles.

Detecting proteins in ultralow concentrations in complex media is important for many applications but often relies on complicated techniques. Herein, a single-molecule protein analyzer with the potential for high-throughput applications is reported. Gold-coated magnetic nanoparticles with DNA-labeled antibodies were used for target recognition and separation. The immunocomplex was loaded into microdroplets generated with centrifugation. Immuno-PCR amplification of the DNA enabled the quantification of proteins at the level of single molecules. As an example, ultrasensitive detection of α-synuclein, a biomarker for neurodegenerative diseases, is achieved. The limit of detection was determined to be ∼50 aM in buffer and ∼170 aM in serum. The method exhibited high specificity and could be used to analyze post-translational modifications such as protein phosphorylation. This study will inspire wider studies on single-molecule protein detection, especially in disease diagnostics, biomarker discovery, and drug development.

Magnetically actuated glaucoma drainage device for regulating intraocular pressure after implantation.

The key risk factor for glaucoma is increased intraocular pressure (IOP). Glaucoma drainage devices implanted in the eye can reduce IOP and thus stop disease progression. However, most devices currently used in clinical practice are passive and do not allow for postsurgical IOP control, which may result in serious complications such as hypotony (i.e., excessively low IOP). To enable noninvasive IOP control, we demonstrate a novel, miniature glaucoma implant that will enable the repeated adjustment of the hydrodynamic resistance after implantation. This is achieved by integrating a magnetic microvalve containing a micropencil-shaped plug that is moved using an external magnet, thereby opening or closing fluidic channels. The microplug is made from biocompatible poly(styrene-block-isobutylene-block-styrene) (SIBS) containing iron microparticles. The complete implant consists of an SIBS drainage tube and a housing element containing the microvalve and fabricated with hot embossing using femtosecond laser-machined glass molds. Using in vitro and ex vivo microfluidic experiments, we demonstrate that when the microvalve is closed, it can provide sufficient hydrodynamic resistance to overcome hypotony. Valve function is repeatable and stable over time. Due to its small size, our implant is a promising, safe, easy-to-implant, minimally invasive glaucoma surgery device.

Single Hydrogel Particle Mechanics and Dynamics Studied by Combining Capillary Micromechanics with Osmotic Compression.

Hydrogels can exhibit a remarkably complex response to external stimuli and show rich mechanical behavior. Previous studies of the mechanics of hydrogel particles have generally focused on their static, rather than dynamic, response, as traditional methods for measuring single particle response at the microscopic scale cannot readily measure time-dependent mechanics. Here, we study both the static and the time-dependent response of a single batch of polyacrylamide (PAAm) particles by combining direct contact forces, applied by using Capillary Micromechanics, a method where particles are deformed in a tapered capillary, and osmotic forces are applied by a high molecular weight dextran solution. We found higher values of the static compressive and shear elastic moduli for particles exposed to dextran, as compared to water (KDex≈63 kPa vs. Kwater≈36 kPa, and GDex≈16 kPa vs. Gwater≈7 kPa), which we accounted for, theoretically, as being the result of the increased internal polymer concentration. For the dynamic response, we observed surprising behavior, not readily explained by poroelastic theories. The particles exposed to dextran solutions deformed more slowly under applied external forces than did those suspended in water (τDex≈90 s vs. τwater≈15 s). The theoretical expectation was the opposite. However, we could account for this behaviour by considering the diffusion of dextran molecules in the surrounding solution, which we found to dominate the compression dynamics of our hydrogel particles suspended in dextran solutions.

A model for designing intraocular pressure-regulating glaucoma implants.

Glaucoma is a group of eye conditions that damage the optic nerve, the health of which is vital for vision. The key risk factor for the development and progression of this disease is increased intraocular pressure (IOP). Implantable glaucoma drainage devices have been developed to divert aqueous humor from the glaucomatous eye as a means of reducing IOP. The artificial drainage pathway created by these devices drives the fluid into a filtering bleb. The long-term success of filtration surgery is dictated by the proper functioning of the bleb and overlying Tenon's and conjunctival tissue. To better understand the influence of the health condition of these tissues on IOP, we have developed a mathematical model of fluid production in the eye, its removal from the anterior chamber by a particular glaucoma implant-the PRESERFLO® MicroShunt-, drainage into the bleb and absorption by the subconjunctival vasculature. The mathematical model was numerically solved by commercial FEM package COMSOL. Our numerical results of IOP for different postoperative conditions are consistent with the available evidence on IOP outcomes after the implantation of this device. To obtain insight into the adjustments in the implant's hydrodynamic resistance that are required for IOP control when hypotony or bleb scarring due to tissue fibrosis take place, we have simulated the flow through a microshunt with an adjustable lumen diameter. Our findings show that increasing the hydrodynamic resistance of the microshunt by reducing the lumen diameter, can effectively help to prevent hypotony. However, decreasing the hydrodynamic resistance of the implant will not sufficiently decrease the IOP to acceptable levels when the bleb is encapsulated due to tissue fibrosis. Therefore, to effectively reduce IOP, the adjustable glaucoma implant should be combined with a means of reducing fibrosis. The results reported herein may provide guidelines to support the design of future glaucoma implants with adjustable hydrodynamic resistances.

An integrated system for automated measurement of airborne pollen based on electrostatic enrichment and image analysis with machine vision.

Here we describe an automated and compact pollen detection system that integrates enrichment, in-situ detection and self-cleaning modules. The system can achieve continuous capture and enrichment of pollen grains in air samples by electrostatic adsorption. The captured pollen grains are imaged with a digital camera, and an automated image analysis based on machine vision is performed, which enables a quantification of the number of pollen particles as well as a preliminary classification into two types of pollen grains. In order to optimize and evaluate the system performance, we developed a testing approach that utilizes an airflow containing a precisely metered amount of pollen particles surrounded by a sheath flow to achieve the generation and lossless transmission of standard gas samples. We studied various factors affecting the pollen capture efficiency, including the applied voltage, air flow rate and humidity. Under optimized conditions, the system was successfully used in the measurement of airborne pollen particles within a wide range of concentrations, spanning 3 orders of magnitude.

Conventional glaucoma implants and the new MIGS devices: a comprehensive review of current options and future directions.

Glaucoma is a progressive optic neuropathy that is the second leading cause of preventable blindness worldwide, after cataract formation. A rise in the intraocular pressure (IOP) is considered to be a major risk factor for glaucoma and is associated with an abnormal increase of resistance to aqueous humour outflow from the anterior chamber. Glaucoma drainage devices have been developed to provide an alternative pathway through which aqueous humour can effectively exit the anterior chamber, thereby reducing IOP. These devices include the traditional aqueous shunts with tube-plate design, as well as more recent implants, such as the trabeculectomy-modifying EX-PRESS® implant and the new minimally invasive glaucoma surgery (MIGS) devices. In this review, we will describe each implant in detail, focusing on their efficacy in reducing IOP and safety profile. Additionally, a critical and evidence-based comparison between these implants will be provided. Finally, we will propose potential developments that may help to improve the performance of current devices.

Compression and swelling of hydrogels in polymer solutions: A dominant-mode model.

The swelling and compression of hydrogels in polymer solutions can be understood by considering hydrogel-osmolyte-solvent interactions which determine the osmotic pressure difference between the inside and the outside of a hydrogel particle and the changes in effective solvent quality for the hydrogel network. Using the theory of poroelasticity, we find the exact solution to hydrogel dynamics in a dilute polymer solution, which quantifies the effect of diffusion and partitioning of osmolyte and the related solvent quality change to the volumetric changes of the hydrogel network. By making a dominant-mode assumption, we propose a model for the swelling and compression dynamics of (spherical) hydrogels in concentrated polymer solutions. Osmolyte diffusion induces a biexponential response in the size of the hydrogel radius, whereas osmolyte partitioning and solvent quality effects induce monoexponential responses. Comparison of the dominant-mode model to experiments provides reasonable values for the compressive bulk modulus of a hydrogel particle, the permeability of the hydrogel network, and the diffusion constant of osmolyte molecules inside the hydrogel network. Our model shows that hydrogel-osmolyte interactions can be described in a conceptually simple manner, while still capturing the rich (de)swelling behaviors observed in experiments. We expect our approach to provide a roadmap for further research into and applications of hydrogel dynamics induced by, for example, changes in the temperature and the pH.

Nonmonotonic swelling and compression dynamics of hydrogels in polymer solutions.

Hydrogels are sponge-like materials that can absorb or expel significant amounts of water. Swelling up from a dried state, they can swell up more than a hundredfold in volume, with the kinetics and the degree of swelling depending sensitively on the physicochemical properties of both the polymer network and the aqueous solvent. In particular, the presence of dissolved macromolecules in the background liquid can have a significant effect, as the macromolecules can exert an additional external osmotic pressure on the hydrogel material, thereby reducing the degree of swelling. In this paper, we have submerged dry hydrogel particles in polymer solutions containing large and small macromolecules. Interestingly, for swelling in the presence of large macromolecules we observe a concentration-dependent overshoot behavior, where the particle volume first continuously increases toward a maximum, after which it decreases again, reaching a lower, equilibrium value. In the presence of smaller macromolecules we do not observe this intriguing overshoot behavior, but instead observe a rapid growth followed by a slowed-down growth. To account for the observed overshoot behavior, we realize that the macromolecules entering the hydrogel network not only lead to a reduction of the osmotic pressure difference, but their presence within the network also affects the swelling behavior through a modification of the solvent-polymer interactions. In this physical picture of the swelling process, the net amount of volume change should thus depend on the magnitudes of both the reduction in osmotic pressure and the change in effective solvent quality associated with the macromolecules entering the pores of the hydrogel network. We develop a phenomenological model that incorporates both of these effects. Using this model we are able to account for both the swelling and compression kinetics of hydrogels within aqueous polymer solutions, as a function of the size of the dissolved macromolecules and of their effect on the effective solvent quality.

Effects of Surfactant and Urea on Dynamics and Viscoelastic Properties of Hydrophobically Assembled Supramolecular Hydrogel.

Physically associated hydrogels based on strong hydrophobic interactions often have attractive mechanical properties that combine processability with elasticity. However, there is a need to study such interactions and understand their relation to the macroscopic hydrogel properties. Therefore, we use the surfactant sodium dodecyl sulfate (SDS) and urea as reagents that disrupt hydrophobic interactions. The model hydrogel is based on a segmented copolymer between poly(ethylene glycol) (PEG) and hydrophobic dimer fatty acid (DFA). We show that both agents influence viscoelastic properties, dynamics, and relaxation processes of the model hydrogel. In particular, the relaxation time is significantly reduced by urea, as compared to SDS, whereas the surfactant causes a decrease of the modulus of the hydrogel more efficiently. The reversibility of the effects of SDS and urea can be exploited, for instance, by using an injectable sol that solidifies when the SDS or urea diffuses out of the sample. Surfactant-induced processability may be advantageous in future applications of hydrophobically assembled physical hydrogels.

Monodisperse Microshell Structured Gelatin Microparticles for Temporary Chemoembolization.

Embolization is a nonsurgical, minimally invasive procedure that deliberately blocks a blood vessel. Although several embolic particles have been commercialized, their much wider applications have been hampered owing mainly to particle size variation and uncontrollable degradation kinetics. Herein we introduce a microfluidic approach to fabricate highly monodisperse gelatin microparticles (GMPs) with a microshell structure. For this purpose, we fabricate uniform gelatin emulsion precursors using a microfluidic technique and consecutively cross-link them by inbound diffusion of glutaraldehyde from the oil continuous phase to the suspending gelatin precursor droplets. A model micromechanic study, carried out in an artificial blood vessel, demonstrates that the extraordinary degradation kinetics of the GMPs, which stems from the microshell structure, enables controlled rupturing while exhibiting drug release under temporary chemoembolic conditions.

Compression and Reswelling of Microgel Particles after an Osmotic Shock.

We use dedicated microfluidic devices to expose soft hydrogel particles to a rapid change in the externally applied osmotic pressure and observe a surprising, nonmonotonic response: After an initial rapid compression, the particle slowly reswells to approximately its original size. We theoretically account for this behavior, enabling us to extract important material properties from a single microfluidic experiment, including the compressive modulus, the gel permeability, and the diffusivity of the osmolyte inside the gel. We expect our approach to be relevant to applications such as controlled release, chromatography, and responsive materials.

Tough Supramolecular Hydrogel Based on Strong Hydrophobic Interactions in a Multiblock Segmented Copolymer.

We report the preparation and structural and mechanical characterization of a tough supramolecular hydrogel, based exclusively on hydrophobic association. The system consists of a multiblock, segmented copolymer of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic dimer fatty acid (DFA) building blocks. A series of copolymers containing 2K, 4K, and 8K PEG were prepared. Upon swelling in water, a network is formed by self-assembly of hydrophobic DFA units in micellar domains, which act as stable physical cross-link points. The resulting hydrogels are noneroding and contain 75-92 wt % of water at swelling equilibrium. Small-angle neutron scattering (SANS) measurements showed that the aggregation number of micelles ranges from 2 × 102 to 6 × 102 DFA units, increasing with PEG molecular weight. Mechanical characterization indicated that the hydrogel containing PEG 2000 is mechanically very stable and tough, possessing a tensile toughness of 4.12 MJ/m3. The high toughness, processability, and ease of preparation make these hydrogels very attractive for applications where mechanical stability and load bearing features of soft materials are required.

Diffusing-wave spectroscopy in a standard dynamic light scattering setup.

Diffusing-wave spectroscopy (DWS) extends dynamic light scattering measurements to samples with strong multiple scattering. DWS treats the transport of photons through turbid samples as a diffusion process, thereby making it possible to extract the dynamics of scatterers from measured correlation functions. The analysis of DWS data requires knowledge of the path length distribution of photons traveling through the sample. While for flat sample cells this path length distribution can be readily calculated and expressed in analytical form; no such expression is available for cylindrical sample cells. DWS measurements have therefore typically relied on dedicated setups that use flat sample cells. Here we show how DWS measurements, in particular DWS-based microrheology measurements, can be performed in standard dynamic light scattering setups that use cylindrical sample cells. To do so we perform simple random-walk simulations that yield numerical predictions of the path length distribution as a function of both the transport mean free path and the detection angle. This information is used in experiments to extract the mean-square displacement of tracer particles in the material, as well as the corresponding frequency-dependent viscoelastic response. An important advantage of our approach is that by performing measurements at different detection angles, the average path length through the sample can be varied. For measurements performed on a single sample cell, this gives access to a wider range of length and time scales than obtained in a conventional DWS setup. Such angle-dependent measurements also offer an important consistency check, as for all detection angles the DWS analysis should yield the same tracer dynamics, even though the respective path length distributions are very different. We validate our approach by performing measurements both on aqueous suspensions of tracer particles and on solidlike gelatin samples, for which we find our DWS-based microrheology data to be in good agreement with rheological measurements performed on the same samples.

Convection associated with exclusion zone formation in colloidal suspensions.

The long-range repulsion of colloids from various interfaces has been observed in a wide range of studies from different research disciplines. This so-called exclusion zone (EZ) formation occurs near surfaces such as hydrogels, polymers, or biological tissues. It was recently shown that the underlying physical mechanism leading to this long-range repulsion is a combination of ion-exchange at the interface, diffusion of ions, and diffusiophoresis of colloids in the resulting ion concentration gradients. In this paper, we show that the same ion concentration gradients that lead to exclusion zone formation also imply that diffusioosmosis near the walls of the sample cell must occur. This should lead to convective flow patterns that are directly associated with exclusion zone formation. We use multi-particle tracking to study the dynamics of particles during exclusion zone formation in detail, confirming that indeed two pronounced vortex-like convection rolls occur near the cell walls. These dramatic flow patterns persist for more than 4 hours, with the typical velocity decreasing as a function of time. We find that the flow velocity depends strongly on the surface properties of the sample cell walls, consistent with diffusioosmosis being the main physical mechanism that governs these convective flows.

Topochemical polymerization in self-assembled rodlike micelles of bisurea bolaamphiphiles.

Rod-like micelles, formed from bolaamphiphiles with oligo(ethylene oxide) hydrophilic outer segments and a hydrophobic segment with diacetylene flanked by two urea moieties, were covalently fixated by topochemical photopolymerization to high degrees of polymerization by optimizing the hydrophobic core and the hydrophilic periphery of the bolaamphiphiles. Analysis of the polymerized product with dynamic light scattering in chloroform showed degrees of polymerization of approximately 250. Cryo-TEMof bolaamphiphiles before and after UV irradiation showed that the morphology of the rods was conserved upon topochemical polymerization.

Tough stimuli-responsive supramolecular hydrogels with hydrogen-bonding network junctions.

Hydrogels were prepared with physical cross-links comprising 2-ureido-4[1H]-pyrimidinone (UPy) hydrogen-bonding units within the backbone of segmented amphiphilic macromolecules having hydrophilic poly(ethylene glycol) (PEG). The bulk materials adopt nanoscopic physical cross-links composed of UPy-UPy dimers embedded in segregated hydrophobic domains dispersed within the PEG matrix as comfirmed by cryo-electron microscopy. The amphiphilic network was swollen with high weight fractions of water (w(H2O) ≈ 0.8) owing to the high PEG weight fraction within the pristine polymers (w(PEG) ≈ 0.9). Two different PEG chain lengths were investigated and illustrate the corresponding consequences of cross-link density on mechanical properties. The resulting hydrogels exhibited high strength and resilience upon deformation, consistent with a microphase separated network, in which the UPy-UPy interactions were adequately shielded within hydrophobic nanoscale pockets that maintain the network despite extensive water content. The cumulative result is a series of tough hydrogels with tunable mechanical properties and tractable synthetic preparation and processing. Furthermore, the melting transition of PEG in the dry polymer was shown to be an effective stimulus for shape memory behavior.

Long-range repulsion of colloids driven by ion exchange and diffusiophoresis.

Interactions between surfaces and particles in aqueous suspension are usually limited to distances smaller than 1 µm. However, in a range of studies from different disciplines, repulsion of particles has been observed over distances of up to hundreds of micrometers, in the absence of any additional external fields. Although a range of hypotheses have been suggested to account for such behavior, the physical mechanisms responsible for the phenomenon still remain unclear. To identify and isolate these mechanisms, we perform detailed experiments on a well-defined experimental system, using a setup that minimizes the effects of gravity and convection. Our experiments clearly indicate that the observed long-range repulsion is driven by a combination of ion exchange, ion diffusion, and diffusiophoresis. We develop a simple model that accounts for our data; this description is expected to be directly applicable to a wide range of systems exhibiting similar long-range forces.

Capillary micromechanics for core-shell particles.

In this work, we have developed a facile, economical microfluidic approach as well as a simple model description to measure and predict the mechanical properties of composite core-shell microparticles made from materials with dramatically different elastic properties. By forcing the particles through a tapered capillary and analyzing their deformation, the shear and compressive moduli can be measured in one single experiment. We have also formulated theoretical models that accurately capture the moduli of the microparticles in both the elastic and the non-linear deformation regimes. Our results show how the moduli of these core-shell structures depend on the material composition of the core-shell microparticles, as well as on their microstructures. The proposed technique and the understanding enabled by it also provide valuable insights into the mechanical behavior of analogous biomaterials, such as liposomes and cells.